Medium/Sedan Vault (16.4'x7.4'x5')
-
Dimensions
-
Specifications
- Patent Pending Design
- Custom fabricated by hand in the USA
- Entire shell is fabricated from Durable, Waterproof, Puncture and Tear Resistant PVC Coated Woven Polyester Fabric
- Shell Weight: 18.5 ounces per square yard
- Tensile Strength: ASTM D5035 441 lbs. / 444 lbs.
- TIZIP MasterSeal 10 German made waterproof continuous closed end zipper with Polymer slider
- One inch overlapped Radio Frequency and Heat Welded Seams
- Two Sealed Vacuum Ports, front and rear
- Mildew And Rot Resistant
- Ultraviolet Light Resistant
- Rodent Resistant
- Reusable for many seasons of flood water protection
- Waterproof Charging Port and Inside Extension Cord Included
-
Our Enclosure Is Designed To Fit*
TIZIP MasterSeal #10
- Sealing strength of 1.0 bar (14.5 PSI)
- 100% waterproof & airtight
- Temperature rated for -30 degrees Celsius to +70 degrees Celsius
- Tensile strength greater than 1.0 ton/meter length
- ISO 9001 Certified
Get your car FloodVault covered easy as 1-2-3!
Preparation
- Close all windows and doors completely.
- Remove any existing antenna.
- Always use a soft cloth Car Cover for ultimate paint finish protection (carcover, carcoversfactory, covercraft).
- Use car Dehumidifier bag inside the automobile to absorb any remaining moisture while stored (ZARPAX, WISEDRY, FUNOUO, Absorb Pro available on Amazon).
Placement
- Install on a clean, level, and covered surface out of direct sunlight.
- Install on a completely dry automobile.
- Install on a completely cold automobile (the Catalytic Converter on a warm automobile can damage the base).
Seal
- Vacuum out any excess air only until the cover takes on the shape of the automobile.
- Do not over vacuum as the negative pressure puts undue stress on the glass and body panels. The cover should be form- fitting but not too tight. It is normal after several days for the cover to relax a bit (WORX 20V Power Share Vacuum available on Amazon).